CertainTeed Insulation Removal Nationwide

CertainTeed Insulation Removal in Pasadena: What to Know First

CertainTeed insulation removal in Pasadena typically runs $1,200 to $3,400 depending on attic square footage, insulation type, and how much contamination or damage we’re dealing with. Most jobs are completed in one day, and we provide a written price before a single tool comes off the truck so the number you approve is the number you pay. That’s how Alden Insulation Pasadena has operated since joining the Garrison Partners family in 2002.

Call (626) 628-2368

This page is for homeowners in Pasadena, Altadena, South Pasadena, and the surrounding San Gabriel Valley who have CertainTeed insulation in their attic and need it pulled out. Whether the material has absorbed moisture from a roof leak, been torn up by rodents, or simply degraded past the point of doing its job, removal is the first step toward a clean, properly insulated attic. If you’re not sure what you’re looking at up there, call (626) 628-2368 and we’ll walk you through it. We’re an independent CertainTeed service provider – not affiliated with or authorized by CertainTeed – but we remove their products every week and know exactly what a CertainTeed job involves.

How CertainTeed Products Fail – and How We Fix Them

CertainTeed makes decent insulation, but every product line has known failure modes we see regularly in Pasadena attics. Here’s what we encounter most often, and what we do about it:

• InsulSafe blown-in fiberglass settling and compression. CertainTeed InsulSafe is ubiquitous in San Gabriel Valley homes built in the 1980s and 1990s. Over two or three decades, the loose fiberglass settles and loses loft, which quietly drops the R-value from R-30 or R-38 down to something closer to R-19. The fix is full removal, air sealing, and a fresh blown-in application. You can’t top it off and call it done; the compressed bottom layer stays damp and dense and keeps underperforming.
• Optima and TrueComfort batts going crusty from roof leaks. CertainTeed’s Optima and TrueComfort fiberglass batts handle moisture poorly. When a Pasadena roof leak drips onto them, they wick water into the kraft paper facing, then dry into a stiff, crusty slab that holds mold and smells like a wet basement. We’ve pulled TrueComfort batts out of attics near the Pasadena Civic Auditorium that had fused to the drywall below. Removal means cutting sections out carefully, bagging them, and sanitizing the deck before insulating again.
• Miraflex and blown-in products shredded by rodents. CertainTeed Miraflex fiberglass is spun fine, and rats and mice in Pasadena’s older neighborhoods love tunneling through it. Once rodents nest in it, the material is contaminated with droppings and urine and can’t be salvaged. We remove it, sanitize the attic floor, seal entry points, and re-insulate. Leaving contaminated insulation in place just invites the next generation of rodents back.
• Moisture-warped CertainTeed foam board in cathedral ceilings. CertainTeed’s polyiso foam board shows up in some Pasadena remodeled attics and kneewalls. When it’s installed without proper ventilation or against a leaking surface, the foam absorbs moisture and warps, pulling away from framing and leaving gaps. Removal in these tight spaces is slow work: we score and extract it in sections without damaging the surrounding framing.
• Kraft-faced CertainTeed batts trapping humidity against roof decking. In Pasadena’s dry-summer, cool-winter cycle, incorrectly installed kraft-faced batts with the vapor barrier facing the wrong direction trap condensation against the roof sheathing. Homeowners notice rust on nail heads or water staining on the decking. The fix isn’t a patch – the batts come out, the decking dries, and we reinstall with the vapor barrier oriented correctly for Southern California, which often means unfaced material with a separate air seal.

Our CertainTeed Insulation Removal Process

Here’s how a CertainTeed removal goes with our crew, start to finish:

1. 1
   Call and assessment. You call (626) 628-2368. We ask about your attic: square footage, what’s up there, what you’ve noticed. If it’s urgent, we can often get a tech out the same day in Pasadena.
2. 2
   Attic inspection. A background-checked, uniformed technician walks the attic, checks for moisture, rodent activity, and measures the current insulation depth and type. You get a straight read on what’s failing and why.
3. 3
   Written price before work starts. We write down the cost of removal, disposal, any sanitizing, and the new insulation if you want us to re-insulate. The number is firm. You approve it before we touch anything.
4. 4
   Removal and extraction. Our crew vacuums out blown-in material or hand-cuts and bags batts. We protect the living space with floor runners and plastic sheeting, and we work clean. CertainTeed fiberglass is dusty; we use HEPA-filtered extraction equipment.
5. 5
   Sanitizing and air sealing prep. Once the old insulation is out, we treat for any mold or odor issues and assess air sealing opportunities. If you’re re-insulating with us, we seal penetrations before the new material goes in.
6. 6
   Final walkthrough and written guarantee. We show you the attic when the work’s done. Every job carries our 365-Day Done Right Promise in writing: if anything fails within the year, we come back at no charge.

Bryce Holloway, our owner, learned his trade fundamentals at Los Angeles Trade-Technical College and spent the better part of two decades doing insulation work across the San Gabriel Valley before building Alden around a simple standard: do the job right the first time, with an honest assessment and no mystery pricing. That’s the Garrison Code in practice.

What CertainTeed Insulation Removal Costs in Pasadena

CertainTeed removal prices in Pasadena depend on three things: attic size, insulation type, and contamination level. Here’s what we typically see:

• Blown-in fiberglass removal (InsulSafe or similar), 800 – 1,200 sq ft attic: $1,200 – $2,100
• Batt removal (TrueComfort, Optima, Miraflex), 800 – 1,200 sq ft attic: $1,400 – $2,600
• Rodent-contaminated removal with sanitizing: $1,800 – $3,400, depending on severity and attic access difficulty
• Foam board or cathedral ceiling removal (limited area): $900 – $2,200

What moves the price up: tight attic access that slows the work, heavy rodent contamination requiring full sanitizing, and steep roof pitches that make toeholds awkward. What keeps it down: a clean, empty attic with good access and a simple one-material job. Every quote is written, and every estimate is free. Call (626) 628-2368 and we’ll give you an exact number for your attic before any work is scheduled.

Why Pasadena Homeowners Call Alden Insulation Pasadena for CertainTeed Work

Most homeowners don’t think about insulation until it starts failing, and by then they want a crew that won’t make the problem worse. The Garrison Standard applies to every job we take: written prices, written guarantees, and background-checked technicians who show up inside the window they promised. That’s the discipline we were founded on in 2002, and it hasn’t slipped since.

On CertainTeed removals specifically, our techs know the product lines, their weak points, and how to extract old material without turning your house into a dust cloud. We also work with seven other brands – Owens Corning, Johns Manville, Knauf, Rockwool, Icynene, Demilec, GreenFiber, and Reflectix – so if you want to switch away from CertainTeed after removal, we can quote a comparable or better replacement without sending you to another contractor. One crew, one written price, one call: (626) 628-2368. A live person answers, 24/7.

FAQs